Konstruct Gage App (iPad Only)

Konstruct App - Ver 1.30 - 08/17/15-4:00pm
- Change: Overal Taper Value Calculation
​- Change: Overal Pitch Value Calculation
- Change: Optimization in data reconstruction

Konstruct App - Ver 1.20 - 08/04/15-4:00pm
- New Feature: Calibration of the gage
​- New Feature: Centering of the gage
​- New Feature: Preset value to the readings based on the calibration 
​- New Feature: A new selector added to the main page: Dial Reading/ActualValue
- Change: Minor bug fix in reading Dial L
- Change: adjust calculation in Analyze page based on Calibration/Centering values

Konstruct App - Ver 1.10 - 07/23/15-8:00am
- New Feature: A table added to see the recorded data values
- New feature added: Recording the data every 5 degree
- Change: Export both RAW and PROCESSED CSV files together 

Konstruct App - Ver 1.00 - 07/20/15-6:00pm
- First Test - Beta

iRotorBalancer App (iPad Only)

iRotorBalancer App - Ver 1.25 - 03/26/15-11:00pm
- fix to GET amplitude from 1X RPM
- fix in calculating the phase in 2-plane balancing

CATService App (iPad only)

CATService App - Ver 1.1 - 2/6/15-11:00am
- In Deflection page: the V and H in the table changed to Vertical and Horizontal with gray color rows showing the calculated vertical/horizontal deflections
In Vibration page: 
- Color change of the test point buttons after each measurement
- Manual/Auto RPM detection button added.
- Textfield to enter RPM manually
- Cursors for 1X and 1/2X added to spectrum
 

CATService App - Ver 1.0 - 1/27/15-11:00am
- Version 1.0 for test: the deflection test works with WiMER device 

DialRead App (iPhone only)

DialRead App - Ver 1.02 - 11/14/14-5:00pm
- Inch Dial Changed 

DialReadRotary App (iPad Only)

DialReadRotary App - Ver 1.02 - 11/14/14-5:00pm
- Inch Dial Changed

DialReadPad App (iPad Only)

DialReadPad App - Ver 1.02 - 11/14/14-5:00pm
- Inch Dial Changed

PowerRead App

PowerRead App - Ver 1.3 - 08/12/15-6:00pm
- Calibration number can be seen and also entered manually
- Battery indicator algorithm improved
- Factory calibration updated for Bluetooth version

PowerRead App - Ver 1.1(new ver. numbering started) - 04/14/15-6:00pm
- minor bug fix in Calibration
- Bluetooth Low Energy (BLE) added ... Beta Version

PowerRead App - Ver 1.45 - 08/23/14-12:00pm

- SQLite Export Issue Fixed
* Do NOT remove the App. Just over-install the App by tapping on this version link

PowerRead App - Ver 1.44 - 05/29/14-6:00pm
- Pausing during the recording added 
- Pausing in the simulation mode fixed 
- New devices added on 08/22/14 

PowerRead App - Ver 1.43 - 05/01/14-5:00pm
- New Feature Added To the Setting: Signal Lost Timeout adjustable by user
- The issue with "Signal Lost" when paused resolved (5/21/14)

PowerRead App - Ver 1.42 - 04/14/14-8:00pm
- New Feature Added: Automatic Data Saving When Signal Lost

PowerRead App - Ver 1.41 - 04/06/14-5:00pm
- Calibration issue fixed

PowerRead App - Ver 1.4 - 02/24/14-7:00pm
- Data collection sampling rate is fixed by changing the device firmware and the App
- Time stamp added to the transmitted data
* Note: The old App should be removed first, then install this new version. Version 1.4 requires the new wireless device (iWMD21). 

PowerRead App - Ver 1.3 - 02/13/14-5:00pm
- The name of the exported CSV file is based on the collection date and assigned name by user
- Max x axis limit in collection mode increased from 60 to 600 Hz

PowerRead App - Ver 1.2 - 02/10/14-5:00pm

- Includes the time stamp column in in CSV exported data file

PowerRead App - Ver 1.1 - 02/05/14-8:00pm

- Supports the new WiFi Device
- High sampling rate
- Continuous data collection with no connection drop

PowerRead App - Ver 1.0 - 01/23/14-8:30pm
- Crash in "CSV Export" fixed for large size data

SummitVibe App

SummitVibe - Ver 1.04 - 05/07/15-5:00pm
- Bug fixed in finding the peaks (5th peak was always zero)

SummitVibe - Ver 1.03 - 02/18/15-4:00pm
- New devices authorized
- Updates for the recent iOS versions
- New device added on 03/13/15

SummitVibe - Ver 1.02 - 03/06/14-7:00pm

- Gridlines added to the spectrums
- File names changed to: SerialNumber_Date_Time.pdf
- 5 UDID authorized - 09/18/14

SummitVibe - Ver 1.01 - 03/01/14-10:00am

- The Dropbox working properly
- New provisioning added

SummitVibe - Ver 1.00 - 02/26/14-7:00pm

- Beta Version
- The DropBox PDF upload is not activated yet. Under review by DropBox company... Will be activated in 2-3 days.  

MotorVibe App

MotorVibe - Ver 1.01 - 04/08/14-4:30pm
- Three authorized UDIDs added on 9/5/14
- Logo moved to left and title to the middle
- Title is fixed to "Motor Service Report"
- Two textfields for bearing type added
- All textfields are caps and changed to black instead of blue
- A mark added to the measurement point on each page on the image of the motor
- "Final Run Data" title 
- 10 highest peaks are shown in each page instead of 6 peaks
- Peaks in RPM instead of Hz
- Note textfield added to the first and the last page

MotorVibe - Ver 1.00 - 03/05/14-10:00am
- Beta Version

ThreadKing