rssrssrssstore Find us on:

Contact us:           +1 (205) 264-1896                           info@motionics.com
     Smart Tools For Monitoring and Diagnostics of Machinery
you are here: home / products / smart device apps

Wireless Dimensional Measurement

Runout works with Motionics Wireless Runout Kit, synchronizes displacement and angle measurements, and provides a convenient tool to inspect rotor runout on iPad. Read More

MultiGage Reader connects up to 15 BlueDial or WiMER and receive readings from all of them at the same time via Bluetooth Low Energy. It is a convenient tool for simultaneous measurement at multiple locations.

DialFace takes digital instrument readings from our Wireless Measurement Read (WiMER) and allows users to view results in various interactive analog dial faces.

 

DialRead is a real-time digital instrument measurements reader and analyzer, using our Wireless Measurement Read (WiMER). Read More

 

DialReadPad is the iPad version of DialRead, connecting to our Wireless Measurement Read (WiMER) device and reading digital instrument measurements. Read More

DialReadRotary takes digital instrument readings and simultaneously detects rotating angles with its built-in sensor, using our Wireless Measurement Read (WiMER). Read More

This app works with Motionics wireless crankshaft deflection test package to wirelessly capture sensor readings at 5 testing positions on the crankshaft and automatically calculates vertical and horizontal deflections. Contact us for hardware information.

DialReading is developed for users to wirelessly connect and read from Motionics WiMER and BlueDial on an Android device. Read More

Wireless Power Measurement

 

BlueClamp App reads the TRUE RMS current measurements from WiClamp and shows the readings in tables and real-time plots.

port 

PowerReader reads analog DC signals through WiFi channel of the iPad from any our iWMD device, suitable for power monitoring, temperature sensing, etc.

Vibration Analysis

port 

Real-time overall vibration measurements and severity judgment based on different standards, using the iPad with our DAQ system.

 

Vibra Test Pro reads vibration signals from accelerometer connected to iPhone and automatically conducts vibration severity test based on ISO 10816-03. Read More

port 

VibraPad is a vibration analysis tool, specially designed for determining the most common vibration frequencies of machine faults, using one external accelerometer.

port 

An interactive tool for vibration severity test based on ISO 10816-03. User selects the machine type, foundation (flexible or rigid), enters RMS of vibration, and the App shows the operating condition of the machine (Blue, Green, Yellow, or Red ).

port 

REBvive calculates vibration fundamental frequencies of roller element bearings from its geometry or model.

port 

VibraUnits is a vibration units conversion calculator. Converts typical vibration amplitude and frequencies units.

port 

VibeSpectra is a reference guide for the rotating machinery predictive maintenance. Included are expected vibration spectra for various machine faults.

port 

Calculates vibration frequencies of induction motors, gears, rolling element bearings, pumps, fans, journal bearings, and belts. Also, it provides other interactive tools such as vibration severity test based on ISO 10816-3, and vibration units conversions tool.

Rotor Balancing

port

iRotorBalancer is a field balancing tool that uses one external accelerometer and one optical sensor connected to the iPad, for single-plane & two-planes rotor balancing.

port  

iRotorBalance uses different methods for calculating the correction weights for rotor balancing in single-plane or 2-planes.

port 

BalanceVision is an App designed to support balancing procedures, using the camera the user can locate the angular positions on the rotor

Machining and other Tools

port   

ThreadKing provides all the information for Metric/UN taps, Course/Fine threads, thread dimensions, drill sizes for cutting/forming tap and much more...

port 

GCoderOD is a handy tool to generate CNC G-code for various OD machining processes.

port 

4Machining is a quick machining reference tool, providing turning/milling/drilling speed&feed calculation, thread and drill size charts, CNC G&M codes to machinists.

port 

Strobe Light makes your iPhone a strobe light tachometer to measure the speed of rotating machines.

port 

iAlignCalc is the perfect tool for machine shaft alignment, includes several alignment methods and a thermal growth calculator

port 

iGearbox is the ideal tool for training and learning the basics of regular and planetary gearboxes. Also calculates de gear ratio and gear speeds.

port 

iWindTurbine calculates the estimated output power of wind turbines, based on its geometry and basic wind parameters.